lxt907qc资料 | |
lxt907qc |
|
file size : 116 kb
manufacturer:levelone description:notes: 1. dimensions are in inches. 2. metric equivalents are given for general information only. 3. index area: a notch or pin one identification mark shall be located adjacent to pin one and shall be located within the shaded area shown. the manufacturer's identification shall not be used as a pin one identification mark. 4. the minimum limit for dimension lw 1 may be .023 inch (0.58 mm) for leads number 1, 7, 8, and 14 only. 5. dimension lo2 shall be measured from the seating plane to the base plane. 6. this dimension allows for off-center lid, meniscus, and glass overrun. 7. the basic pin spacing is .100 inch (2.54 mm) between centerlines. each pin centerline shall be located within .010 inch (0.25 mm) of its exact longitudinal position relative to pins 1 and 14 (see figure 6). 8. applies to all four corners (leads number 1, 7, 8, and 14). 9. lead center when is 0. bw 1 shall be measured at the centerline of the leads. 10. all leads. 11. twelve spaces. 12. no organic or polymeric materials shall be molded to the bottom of the package to cover the leads. |
1pcs | 100pcs | 1k | 10k | ||
型 号:lxt907qc 厂 家:levelone 封 装:0607 批 号:smd 数 量:1000 说 明: |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林浩/林妮 |
电 话:0755-82532799/82532766/83989559 |
手 机:13510168121/13725556003 |
qq:496982847/351622092 |
msn:linearic@hotmail.com |
传 真:0755-82532766 |
email:maxim_zi@126.com |
公司地址: 深圳市福田区佳和大厦b座1802室 门市部:华强广场 q2a114展销柜 |