mp7510资料 | |
mp7510 |
|
file size : 116 kb
manufacturer: description:eprom power switching characteristics require careful device decoupling. system designers are concerned with three supply current issues: standby current levels (isb), active current levels (icc), and transient current peaks produced by the falling and rising edges of ce . transient current magnitudes depend on the device output's capacitive and inductive loading. two-line control and proper decoupling capacitor selection will suppress transient voltage peaks. each device should have a 0.1 µf ceramic capacitor connected between its vcc and gnd. this high frequency, low inherent- inductance capacitor should be placed as close as possible to the device. additionally, for every eight devices, a 4.7 µf electrolytic capacitor should be placed at the array's power supply connection between vcc and gnd. the bulk capacitor will overcome voltage slumps caused by pc board trace inductances. |
1pcs | 100pcs | 1k | 10k | ||
型 号:mp7510 厂 家: 封 装:0630 批 号: 数 量:20000 说 明: |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林浩/林妮 |
电 话:0755-82532799/82532766/83989559 |
手 机:13510168121/13725556003 |
qq:496982847/351622092 |
msn:linearic@hotmail.com |
传 真:0755-82532766 |
email:maxim_zi@126.com |
公司地址: 深圳市福田区佳和大厦b座1802室 门市部:华强广场 q2a114展销柜 |