msc5506资料 | |
msc5506 |
|
file size : 116 kb
manufacturer: description:this pin goes low when the th set point is exceeded by 10oc (typical). this indicates that the fan is at maximum drive and the potential exists for system overheating; either heat dissipation in the system has gone beyond the cooling system's design limits, or some fault exists such as fan bearing failure or an airflow obstruction. this output may be treated as a system overheat warning and used to trigger system shutdown, or bring other fans to full speed in the system. the fan will continue to run at 100% speed while tover is asserted. built-in hysteresis prevents tover from chattering when measured temperature is at or near the th 10c trip point. as temperature falls through the th 10c trip point, hysteresis maintains the tover output low until measured temperature is 5c above the trip point setting. |
1pcs | 100pcs | 1k | 10k | ||
型 号:msc5506 厂 家: 封 装:0529 批 号: 数 量:3116 说 明: |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林浩/林妮 |
电 话:0755-82532799/82532766/83989559 |
手 机:13510168121/13725556003 |
qq:496982847/351622092 |
msn:linearic@hotmail.com |
传 真:0755-82532766 |
email:maxim_zi@126.com |
公司地址: 深圳市福田区佳和大厦b座1802室 门市部:华强广场 q2a114展销柜 |