rm150dz-2h资料 | |
rm150dz-2h |
|
file size : 116 kb
manufacturer:三菱 description: 2. these limits define the range of operation for which the part will meet specification. 3. within the supply range of 4.75 and 5.25 volts, the device operates as a fully calibrated linear accelerometer. beyond these supply limits the device may operate as a linear device but is not guaranteed to be in calibration. 4. the device can measure both and c acceleration. with no input acceleration the output is at midsupply. for positive acceleration the output will increase above vdd/2 and for negative acceleration the output will decrease below vdd/2. 5. the device is calibrated at 20g. 6. at clock frequency ≅70 khz. 7. the digital input pin has an internal pull-down current source to prevent inadvertent self test initiation due to external board level leakages. 8. time for the output to reach 90% of its final value after a self-test is initiated. 9. time for amplifiers to recover after an acceleration signal causing them to saturate. 10. preserves phase margin (60) to guarantee output amplifier stability. 11. a measure of the device's ability to reject an acceleration applied 90 from the true axis of sensitivity. 12. the status pin output is not valid following power-up until at least one rising edge has been applied to the self-test pin. the status pin is high whenever the self-test input is high, as a means to check the connectivity of the self-test and status pins in the application. 13. the status pin output latches high if a low voltage detection or clock frequency failure occurs, or the eprom parity changes to odd. the status pin can be reset low if the self-test pin is pulsed with a high input for at least 100 µs, unless a fault condition continues to exist. |
1pcs | 100pcs | 1k | 10k | ||
型 号:rm150dz-2h 厂 家:三菱 封 装:模块 批 号:06 数 量:40 说 明:优势库存现货 |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林浩/林妮 |
电 话:0755-82532799/82532766/83989559 |
手 机:13510168121/13725556003 |
qq:496982847/351622092 |
msn:linearic@hotmail.com |
传 真:0755-82532766 |
email:maxim_zi@126.com |
公司地址: 深圳市福田区佳和大厦b座1802室 门市部:华强广场 q2a114展销柜 |